High-strength adhesive strengthened with structural fibres
Glass fibre reinforcement
Thanks to the integrated glass fibre reinforcement, outstanding adhesive strength is achieved even with adhesive bonds under heavy loads.
Tested adhesive properties
Tested water resistance level D4 in accordance with EN 204 (test number: 50533042/3)
Thermal stability in accordance with EN 14257 - Watt 91 (test number: 505 33042/4)
Fast reaction time with high initial strength after just approx. 15 minutes.
Enables you to continue working quickly.
Wide range of adhesion
Can be sanded and painted over
Resistant to weathering and ageing
For safety reasons, the adhesive bead must not be more than 2.5 mm.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Min./max. temperature resistance
-30 to 110 °C
Min./max. processing temperature
7 to 35 °C
Shelf life from production/conditions
12 Month / at 15°C to 25°C
Min. flashing point
Full curing speed/conditions
1 mm/d / Depending on the strength of caterpillars